Product, parcel and roll labels · Since 2017
Label printing in Singapore, roll and sheet.
Label printing is three decisions: the face, the adhesive and the liner. Tell us the surface it goes onto and how long it has to stay there, and those three follow.
Label printing in Singapore, in one paragraph
EZ Print prints product and parcel labels in Singapore, and has done since 2017. Faces are paper for indoor and short-life use, and vinyl or synthetic film where the label must survive moisture, refrigeration or handling.
Labels are supplied on sheets or on rolls, kiss-cut so the face peels while the liner stays whole, or die-cut through to a free shape. Adhesives are permanent, removable or low-tack, chosen for the surface and the intended life.
Matt, gloss and soft-touch lamination protect the printed face, and a matt laminate is what makes a label writable.
Standard turnaround is generally 7–14 working days.
EZ Print quotes from the specification and does not publish prices.
What a label quote needs
- Quantity and size: for example 2,000 labels at 60 × 40 mm.
- Face and adhesive: and the surface the label goes onto.
- Finish: matt, gloss or soft-touch lamination.
- Supply: sheets, or a roll with its core and unwind direction.
- Shape: rounded corners, or a cut path on its own layer.
- Date: when you need them.
Everything answered
Label printing questions
Which label face suits a refrigerated or wet product?
Vinyl or synthetic film. A paper face wicks water at the cut edge, so paper labels suit indoor and short-life use.
Can labels be supplied on a roll?
Yes. Labels are supplied on A4 or A3 sheets, or on rolls with a stated core and unwind direction. Tell us how the labels will be applied so the roll is wound the right way.
What is the difference between kiss-cut and die-cut labels?
A kiss-cut goes through the face only, so the face peels while the liner stays whole. A die-cut goes through to a free shape.
Which adhesive should a label use?
Permanent for a product, removable for a promotion, and low-tack where a surface must be left unmarked. The choice depends on the surface and how long the label has to stay on.
Can a label be written on?
Yes, with a matt laminate. A matt laminate takes a marker pen, which gloss does not do as well.
What artwork does a label need?
A print-ready PDF with the cut path on its own layer, 2 mm bleed outside the cut line and a 3 mm safe margin inside it.
Is a cutting die charged again on a reorder?
No. A cutting die or contour path is made once and kept on file, so a reorder does not pay for it again.
Tell us what the label goes on.
Prepare your enquiry with the specification and artwork, then send through WhatsApp or email.
Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.