Custom wallpaper and wall mural printing in Singapore covers two distinct constructions: a paste-the-wall printable non-woven wallcovering that hangs like cloth and strips off dry in whole lengths at the end of a lease, or a self-adhesive wall mural film printed in vertical drops from 148 mm to 1220 mm wide (with a wider 1221 mm to 1500 mm option) and joined with a 25 mm or 50 mm overlap. Choosing between non-woven wallpaper and sticker film depends on whether the wall has slight surface texture, how downlights hit the room, and how the wall must be handed back. To compare options or price a feature wall, see wall mural and custom wallpaper printing and large format graphics printing, or request a quote.
Should you order custom non-woven wallpaper or self-adhesive wall mural film?
Order a printable non-woven wallcovering hung with paste when you want a cloth-like, dead-matt finish that forgives a slightly textured wall and strips off in whole lengths at lease handback; order self-adhesive wall mural film when you have a smooth, fully cured painted wall or hoarding and want a wipeable laminated vinyl surface.
Under ceiling spotlights or office downlights, surface reflectance and hand feel separate the two materials immediately. Self-adhesive film sits a fraction proud of the plaster with a cool, smooth face and a findable edge along the skirting, whereas a non-woven wallcovering reads as part of the architecture without throwing a vinyl sheen.
| Specification | Printable non-woven wallcovering (custom wallpaper) | Self-adhesive wall mural sticker film |
|---|---|---|
| Installation method | Hung with wallpaper paste across the wall | Peel-and-stick adhesive backing applied dry |
| Surface feel and reflectance | Closer to cloth; matt, faintly textured, dead to the touch under downlights | Smooth vinyl face finished with a matt or gloss protective laminate |
| Wall preparation tolerance | Forgives a slightly textured wall surface | Requires a smooth, sound, fully cured and sealed painted surface |
| End-of-lease removal | Strips off dry in whole lengths | Removable grade releases cleanly within its rated period; permanent grades bond long-term |
| Typical environment | Reception walls, hospitality lounges, restaurants, cafés, large office feature walls | Corporate corridors, retail promotions, clinic partitions, renovation hoardings |
If the wall has been newly plastered or freshly painted, neither material should be installed immediately: fresh paint continues outgassing and will peel away with the backing if covered before curing. Heavily textured masonry is also unsuitable for pasted wallcovering or mural film and should be painted instead.
Which self-adhesive wall mural sticker grades are available?
Self-adhesive wall mural orders offer seven specific film grades chosen against the wall condition and campaign duration: Removable, Permanent (Monomeric), Permanent (Polymeric), Blockout (Monomeric), Transparent (Monomeric), Eco Hoarding, and Eco Blockout, paired with matt or gloss lamination so the surface resists scuffing and controls reflection.
Matching the adhesive and film core to the underlying substrate prevents dark patches, board seams, or old paint colours from showing through the finished graphic:
| Sticker mural grade | Core construction and opacity | Where it is specified |
|---|---|---|
| Removable wall film | Printable vinyl with a clean-release adhesive | Leased offices, retail interiors, and medium-term brand campaigns on sound painted plasterboard |
| Permanent (Monomeric) | Flat monomeric vinyl with permanent adhesive | Flat indoor walls, doors, and furniture panels where removal is not planned |
| Permanent (Polymeric) | Dimensionally stable polymeric vinyl | Longer-term indoor and semi-outdoor feature walls requiring reduced shrinkage |
| Blockout (Monomeric) | Monomeric vinyl with an opaque grey/blockout backing layer | Covering walls with existing stains, two-tone paint lines, or high-contrast marks |
| Transparent (Monomeric) | Clear monomeric film (white areas print clear unless white lamination is chosen) | Feature partitions and smooth decorative panels where the background shows through |
| Eco Hoarding / Eco Blockout | Short-term hoarding film (standard or blockout core) | Temporary construction hoardings and short-run renovation enclosures |
When ordering transparent monomeric mural film, remember that unprinted white areas of your artwork remain clear unless white lamination is specified, which turns the sticker opaque. Print-only mural orders are supplied with their surplus white edges still in place for on-site trimming.
What are the panel widths, heights, and overlap rules for tiled murals?
Standard wall mural panels are produced from 148 mm to 1220 mm wide and 210 mm to 6000 mm high, with a wider material option covering 1221 mm to 1500 mm (on 1500 mm roll stock); split murals cap each panel at 1220 mm including a 25 mm overlap (or a 50 mm overlap allowance on site-fitted architectural walls).
Because wide walls exceed a single roll width and a single installer’s reach, murals are tiled vertically or horizontally. You can either let prepress divide the wall into equal drops or submit a split-line file marking custom panel widths around doors, glass panels, or columns.
| Dimension or fitting parameter | Production specification | Practical layout rule |
|---|---|---|
| Standard panel width | 148 mm to 1220 mm |
Maximum 1220 mm per split panel, including the 25 mm overlap |
| Wider roll option | 1221 mm to 1500 mm (material width 1500 mm) |
Used when a single unsplit drop between 1221 mm and 1500 mm avoids a seam |
| Panel height range | 210 mm to 6000 mm |
Measure the highest point of the wall; ceilings and skirtings rarely run level |
| Overlap at panel joins | 25 mm in standard calculator splits; 50 mm allowance on site-fitted murals |
Plan joins into quiet textures or gradients rather than across faces or logos |
| Perimeter clearance | 5 mm gap from skirting, ceiling, and corner lines; 30 mm safe margin for type |
Film pushed hard into a corner lifts first; keep text clear of switch plates |
| Trimming and shrinkage | 2 mm trimming size tolerance; up to 4 mm material shrinkage allowance |
Never place a thin keyline border right along the trim edge |
For related advice on contour-cut wall logos vs edge-to-edge drops, see our wall sticker and decal guide and our window, wall and floor graphic site brief.
How should artwork be prepared for custom wallpaper and wall murals?
Supply a CMYK PDF/X-4 at 150 dpi for 1-metre viewing or 100 dpi for 3-metre viewing at final size (or at quarter scale with the fraction in the file name), keeping body lettering at 14 pt (5 mm) or larger, headline cap height at 25 mm for 2-metre reading, and QR codes above 25 mm square.
- Survey the physical wall before locking the layout: Measure the full width and height in millimetres and map every power socket, thermostat, door architrave, and access panel so logos and faces stay at least
30 mmclear of panel edges and cutouts. - Choose Direct Print or Reverse Print: Standard opaque wall murals use Direct Print on the front face; if you are ordering a reverse-printed clear film for glass or acrylic, supply the artwork unflipped so prepress can reverse it accurately.
- Avoid flat solid corporate colours across panel seams: A slight colour shift or overlap shadow is visible on a flat solid background, whereas photographic textures, architectural patterns, and tonal gradients conceal vertical joins cleanly.
Worked example: specifying a reception wall mural in a leased Singapore office
Hypothetical planning example. Actual production timing, paper availability, and logistics are confirmed individually upon artwork and specification review. A corporate tenant in Singapore is fitting out a reception wall measuring 4200 × 2400 mm in a leased office suite where ceiling downlights run overhead and the wall must be handed back clean at lease end.
- Product: Custom wallpaper or wall mural (
4200 × 2400 mmfinished across three vertical panels). - Material choice: Printable non-woven wallcovering hung with paste (chosen over self-adhesive vinyl so the cloth-like matt finish eliminates downlight glare, bridges the light plaster texture, and strips off dry in whole lengths at lease end) — or removable wall film with a matt laminate if the plasterboard is skimmed smooth and fully cured.
- Panel tiling and overlaps: Split into vertical drops within the
1220 mmpanel limit (or three panels with a50 mmoverlap allowance per panel join and a5 mmgap at the ceiling line, side walls, and skirting). - Typography and scannable elements: Reception tagline set above
25 mmcap height, supporting directory text above14 pt(5 mm), and visitor Wi-Fi QR code sized above25 mmsquare, all kept30 mmclear of panel edges and wall switches. - Artwork file: PDF/X-4 built in CMYK at quarter size (
100 dpiat final size) with panel split lines marked on a non-printing layer. - Turnaround and installation: Standard turnaround is generally 7–14 working days. Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job. Island-wide courier delivery is available across Singapore, and on-site installation is scheduled separately against building access hours.
Frequently asked questions
What is the difference between custom wallpaper and a wall mural sticker?
Custom wallpaper uses a printable non-woven wallcovering hung with paste that feels like matt cloth, forgives slightly textured walls, eliminates downlight sheen, and strips off dry in whole lengths. A wall mural sticker uses self-adhesive vinyl film (in removable, permanent, or blockout grades) with a matt or gloss laminate applied directly to smooth, cured surfaces.
How wide is each panel in a printed wall mural?
Standard mural film is produced from 148 mm to 1220 mm wide (and from 210 mm to 6000 mm high), with each split panel capped at 1220 mm including a 25 mm overlap. A wider roll option is also available for single widths from 1221 mm to 1500 mm (1500 mm material width).
Can a wall mural cover dark stains or hoarding board joints without showing through?
Yes. Selecting Blockout (Monomeric) or Eco Blockout film adds an opaque backing layer that blocks light and conceals dark paint marks, patches, or hoarding panel seams underneath the graphic.
What is the minimum font size and QR code size on a wall mural?
Keep small body lettering at 14 pt (5 mm) or larger, headline text read from two metres at 25 mm cap height or above, and QR codes larger than 25 mm square so phone cameras can scan them reliably.
Ready to specify a custom wallpaper or self-adhesive wall mural for your office, retail store, or hoarding? Explore our wall mural product specifications or request a custom quote with your wall dimensions and surface photo today.
Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job.

