EZ Print — Your Trusted Printing PartnerSame-day & ExpressRequest a quote

Popular searches

Can't find it? Tell us what you need and we will quote it.

Events & Exhibitions · EZ Print journal

Exhibition Booth Panel & Foam Board Printing Singapore

How to specify rigid exhibition booth panels and foam board graphics in Singapore: 3 mm, 5 mm and 10 mm thicknesses, HIPS vs PP sticker mounting.

By EZ Print ·

Illustrative navy sign panel in a fictional lobby setting. Topic example for foam board printing; exact options are confirmed by enquiry.
Illustrative print sample.
Centennial Tower HubPress-Ready PreflightPrintOS ERP Direct

Exhibition shell-scheme walls, frieze headers and tabletop display boards rely on rigid panels that stay flat under hall lighting without curling at the corners. In Singapore, rigid booth graphics are produced on 3 mm, 5 mm, 5 mm black and 10 mm foam board or 5 mm and 10 mm HIPS foam board, either UV-printed directly or mounted with laminated PP sticker. For complete booth hardware and fabric walls, see exhibition stand printing.

What are exhibition booth panels and rigid foam boards used for?

Exhibition booth panels and rigid foam boards are flat display graphics used for shell-scheme infill walls, booth fascia headers, easel posters and freestanding product boards. Supplied in 3 mm, 5 mm and 10 mm thicknesses from A5 to A0 or custom sheets up to 1200 × 2400 mm and 1470 × 3050 mm, they give a rigid, non-curling face inside an exhibition booth.

Unlike rolled PVC or tensioned cloth, a rigid board arrives flat and goes straight onto a shell-scheme wall, an easel or a display channel:

  • Shell-scheme infill and wall graphics: rigid panels sized to fit inside modular booth channels or mounted with Velcro or double-sided tape.
  • Framed display boards: panels from 148 to 1200 mm wide fitted with white, black, gold or silver perimeter frames for foyers and registration desks.
  • Contour-cut headers and props: custom-shaped boards from 80 to 1180 mm wide cut along closed vector paths. For freestanding floor figures with rear struts, see standee printing.
Studio specimen of rigid white foam board exhibition panel with printed graphic and crisp cut edge.
Material specimen — rigid foam board panel supplied in 3 mm, 5 mm, 5 mm black, and 10 mm thicknesses for flat shell-scheme walls and easel displays.

Should you choose direct UV on HIPS foam board or mounted PP sticker?

Choose direct UV ink on 5 mm or 10 mm HIPS foam board when you want a rigid panel printed directly on the board surface, or choose PP sticker with matt or gloss lamination mounted to 5 mm or 10 mm foam board when you want a sealed film surface over the graphic. Under hall spotlights, matt lamination stops directional glare.

Specification Direct UV on HIPS Foam Board PP Sticker Mounted on Foam Board Framed or Contour-Cut Foam Board
Thicknesses 5 mm and 10 mm 3 mm, 5 mm, 5 mm black, 10 mm 3 mm, 5 mm, 5 mm black, 10 mm
Print & surface Direct UV ink on rigid HIPS board PP sticker with matt, gloss or no lamination Rectangular framed or vector V-cut / die-cut
Standard sizes A5, A4, A3, A2, A1, A0 A5, A4, A3, A2, A1, A0 148–1200 mm framed; 80–1180 mm custom shape
Custom panel sizes Up to 1200 × 2400 mm and 1470 × 3050 mm Up to 1200 × 2400 mm and 1470 × 3050 mm Sized to shell-scheme aperture or vector path
Studio specimen of high-impact polystyrene HIPS rigid exhibition board printed with UV ink.
Material specimen — HIPS rigid display board (5 mm and 10 mm) takes UV-cured ink directly on the smooth polystyrene face.

If the panel will sit under strong exhibition spotlights or be photographed, specify matt lamination rather than gloss so lights do not bounce back as hotspots. Compare rigid substrates in our guide to ACP, acrylic and foam board signage materials.

How do framed panels and contour-cut shapes change the artwork?

A perimeter frame covers the outer edge of a board, so keep all text and logos at least 10 mm inside the trim on any framed foam board poster. On contour-cut panels from 80 to 1180 mm wide, supply closed vector cut paths on a separate layer and allow for a 1–2 mm mounting and cutting tolerance.

Each finishing route has its own artwork rules:

  • Single-sided vs double-sided bleed: include 5 mm bleed all round on double-sided prints so no white board edge shows if the second side shifts slightly.
  • Framed foam board panels: available in white, black, gold or silver frames across widths from 148 to 1200 mm; hold all text and logos 10 mm clear of the edge and keep type at 12 pt (4 mm) and above.
  • Unframed large-format foam board: across widths from 148 to 1200 mm and A4 to A0, keep body type at 14 pt (5 mm) and above, aisle headlines at 40 mm cap height and above, and QR codes above 25 mm square.
  • Contour cutting (die-cut and V-cut): custom-shaped foam boards run in 3 mm, 5 mm, 5 mm black and 10 mm thicknesses with vector die-cut or V-cut plus die-cut lines. Avoid thin perimeter borders around the cut line because a 1–2 mm tolerance makes an even border look uneven.

For broader booth planning across Singapore venues, see our Singapore Expo exhibitor printing guide.

Worked example: how would a shell-scheme exhibitor specify rigid booth panels?

An exhibitor fitting out a shell-scheme booth needs three large product wall panels, two framed registration boards for the counter and four contour-cut header signs. Specifying 5 mm foam board with matt-laminated PP sticker, 10 mm edge clearance on the framed boards and PDF/X-4 files at 100 dpi keeps the whole set consistent under hall lights.

Hypothetical planning example. Actual production timing, paper availability, and logistics are confirmed individually upon artwork and specification review.

A trade-show team prepares its rigid panel brief:

  • Wall panels: three 1200 × 2400 mm panels on 5 mm foam board with PP sticker and matt lamination so booth spotlights do not glare.
  • Framed counter boards: two A1 panels on 5 mm foam board in black frames, with all text and logos kept 10 mm inside the trim and QR codes above 25 mm square.
  • Contour-cut headers: four 1180 mm wide custom-shaped header boards on 10 mm foam board, supplied with closed vector cut paths and no fine edge borders.
  • Files: PDF/X-4 at final size at 100 dpi, CMYK colour mode, with 5 mm bleed all round.

Timing. Counting back from the exhibition build day using the standard 7–14 working day window, the team submits artwork early so printing, lamination, framing and contour cutting complete ahead of venue move-in.

Frequently asked questions

What thicknesses do exhibition foam board panels come in?

Rigid exhibition and display panels are supplied in 3 mm, 5 mm, 5 mm black, and 10 mm foam board, or 5 mm and 10 mm HIPS foam board. Standard A5 to A0 sizes and custom panels up to 1200 × 2400 mm and 1470 × 3050 mm are quoted to your brief.

What is the difference between direct UV print on HIPS board and PP sticker mounting?

Direct UV print lays UV-cured ink straight onto rigid 5 mm or 10 mm HIPS foam board. PP sticker mounting prints onto a polypropylene film first, applies matt or gloss lamination, and mounts the laminated sheet onto 5 mm or 10 mm foam board.

How much margin does a framed foam board panel need?

When a foam board panel is fitted with a white, black, gold or silver frame, keep all text and logos at least 10 mm inside the edge so the frame lip does not cover them.

Can foam board booth graphics be contour-cut to custom shapes?

Yes. Custom-shaped panels from 80 to 1180 mm wide are contour-cut using vector die-cut or V-cut plus die-cut paths, with a 1–2 mm cutting and mounting tolerance.

How long do exhibition booth panels take to produce?

Standard turnaround is generally 7–14 working days, including printing, lamination, mounting, framing or contour cutting. Where an exhibition date is tighter, ask for an express quotation with your panel sizes and event date.

How do you get a quote for exhibition booth panels from EZ Print?

EZ Print produces exhibition and roadshow graphics in Singapore, including rigid foam board and HIPS booth panels, and has traded since 2017. Send your panel dimensions, thickness (3 mm, 5 mm or 10 mm), matt or gloss finish, whether panels are rectangular, framed or contour-cut, and your event date. Standard turnaround is generally 7–14 working days, with island-wide courier delivery.

When your panel list is ready, request a quote or explore signage and rigid board printing to complete your brief.

Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job.

Keep reading.

All journal articles →

Turn the guide into your brief.

Tell us the product, quantity, material, finish and date. We’ll confirm the specification in a written quotation.

Ready to put it in print?

Send your brief and artwork. We’ll work through the details with you.

Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.