A good print design is not a screen layout exported to PDF at the last minute — it is a design built from the physical behaviour of paper fibre, ink absorption, cutting tolerances and fold geometry. In Singapore, EZ Print checks every file before production, and you can also verify your trim, bleed, safe margins and DPI immediately using our interactive artwork preflight checker and artwork setup specifications.
How do ink, paper stock and CMYK colour physics shape a good print design?
Screen designs emit RGB light, whereas print lays translucent CMYK ink onto coated, uncoated or brown kraft fibres. Building files in CMYK from the start — using C60 M40 Y40 K100 for large black solids, K100 for small body text, and compensating for the 15% chroma drop on uncoated paper — prevents unexpected colour shifts.
Four colour and typography rules separate a seasoned print designer’s file from a layout that needs pre-press repair:
- Rich Black vs small-type K100: a large solid background built as
K100alone prints as a flat charcoal grey. Build large black solids asC60 M40 Y40 K100(keeping total ink coverage under 240% on coated collateral and under 300% on coated packaging board). Conversely, set all small body text (6–8 pt) in pureK100only — four-colour black on7 pttype shows coloured fringes if press registration shifts by0.5 mm. - Coated vs uncoated and cotton stocks: on uncoated woodfree or simili paper, ink dries into the fibre rather than sitting on a clay coating, so colour drops roughly 15% in chroma. On cotton stock, keep rules at
0.5 ptor heavier (0.25 ptminimum on coated stock) and reverse type at7 ptor larger (6 ptminimum on coated stock). - Brown kraft and clear/metallic substrates: CMYK inks are translucent and turn muddy directly on brown kraft board or transparent/metallic film. Use one or two spot colours, hot foil, or a
100% Kvector layer namedWHITEas an opaque underbase.
What are the exact bleed, safe-margin and DPI rules across print formats?
Every print product requires background artwork to extend past the trim line (bleed) and critical text or logos to stay inside the cut or fold line (safe margin): 2 mm bleed on stickers, 3 mm bleed on cards, flyers, booklets and boxes, and 10 mm bleed on large-format banners and placemats.
Reference this master pre-press table when setting up artboards in Illustrator, InDesign or Canva:
| Product Category | Standard Trim / Format Examples | Required Bleed | Inner Safe Margin (from Trim / Fold / Spine) | Target Image Resolution |
|---|---|---|---|---|
| Business cards | 90 × 54 mm SG standard (96 × 60 mm with bleed); 85 × 55 mm; 89 × 51 mm; 55 × 55 mm |
3 mm all four sides |
4 mm from trim (3 mm minimum for foil / Spot UV) |
300 dpi at 100% size |
| Flyers, postcards & door hangers | A6 105 × 148 mm, DL 99 × 210 mm, A5 148 × 210 mm, A4 210 × 297 mm, 240 × 89 mm hanger |
3 mm all four sides |
4–5 mm from trim (keep clear of door-hanger hole/slot) |
300 dpi (200 dpi floor on A4) |
| Folded brochures & menus | Flat A4 210 × 297 mm folded to DL 99 × 210 mm or A5; A3 297 × 420 mm folded to A4 |
3 mm all four sides |
5 mm from trim and 7 mm from any fold line |
300 dpi at flat size |
| Booklets, handbooks & notebooks | A5 148 × 210 mm, A4 210 × 297 mm, square 210 × 210 mm (÷ 4 pages on saddle stitch) |
3 mm all four sides |
12 mm spine (saddle stitch), 15 mm (perfect bound), 18 mm (wire-O); 8 mm outer edge on thick books |
300 dpi single pages in reading order |
| Packaging boxes & sleeves | Internal L × W × H mm cartons (300–400 gsm), 50–297 mm sleeves, 262 × 50 mm cup sleeves |
3 mm outside every cut edge |
5 mm from any cut or crease; glue flap left unlaminated |
300 dpi with live vector DIELINE |
| Stickers & product labels | 15 × 15 mm minimum up to A3 sheets; held moulds 54 × 92 mm to 113 × 189 mm |
2 mm outside cut path |
3 mm inside cut path; 2 mm minimum internal corner radius |
300 dpi with vector CUT layer |
| Large-format banners, signs & mats | 600–1200 × 2000 mm pull-up; 1200 × 2400 mm sign panels; A4/A3 (420 mm) placemats |
10 mm perimeter bleed |
30–50 mm (PVC banner eyelets); 25 mm around 19 mm standoff drill holes; 150–300 mm bottom pull-up buffer |
150–300 dpi at 100% (or 300 dpi at 10% scale) |
How do folds, bindings, dielines and finishing layers work in the file?
Structural print products require non-printing vector guide layers and mechanical allowances built into the flat file: nested brochure panels drawn 1 mm narrower, saddle-stitched booklets supplied as single pages in multiples of four, packaging sized by internal L × W × H dimensions, and 100% K layers for Spot UV or foil.
Before exporting your PDF/X-4 file, verify the structural mechanics for your format:
- Folded brochures (
FOLDlayer): never divide an A4 tri-fold artboard into three equal thirds. Draw the panel that tucks inside1 mmnarrower (and each inner panel of a roll fold progressively1 mmnarrower) on a non-printingFOLDlayer so the closed brochure lies flat. Above170 gsm, sheets are creased before folding so the coating never cracks. - Booklets (
÷ 4page rule & single pages): never supply printer spreads. Export single pages in reading order (page 1 = front cover). Because each folded signature sheet adds 4 pages, saddle-stitched booklets run in multiples of 4 (8to64or68pages) and compensate for inner-page creep in the imposition. - Special finishes & hardware layers (
100% Kvectors): placeSPOTUV,FOIL,EMBOSS,WHITE,CUT,DIELINEandDRILL(19 mmstandoff holes kept25 mmfrom panel edges with25 mmclear margin around each hole) on separate named vector layers at the exact trim size. - QR codes & barcodes: size QR codes at
20 mmminimum with a4 mmquiet zone on sheet-fed print (25 mmsquare minimum on vinyl stickers and display boards), and keep vector barcodes at100%magnification clear of any crease line.
Worked example: preflighting a corporate launch kit before press
A marketing designer preparing a launch kit — 500 name cards (90 × 54 mm with Spot UV), 1,000 A4-to-DL tri-fold brochures on 157 gsm gloss art paper, and 300 A5 24-page booklets — runs each PDF through the interactive preflight checker to confirm bleed, nested panel widths and single-page export before quoting.
Hypothetical planning example. Actual production timing, paper availability, and logistics are confirmed individually upon artwork and specification review.
The preflight check confirms:
- Name cards (
90 × 54 mm): supplied on a96 × 60 mmartboard (3 mmbleed),4 mmsafe margin,7 ptcontact text inK100, and logo highlight on a separate100% KSPOTUVvector layer. - Tri-fold brochures (A4
210 × 297 mmto DL99 × 210 mm): drawn flat at216 × 303 mmwith3 mmbleed,7 mmfold clearance, and the tucked panel drawn1 mmnarrower on the non-printingFOLDlayer. - A5 booklets (
148 × 210 mm,24pages): exported as 24 single pages in reading order with3 mmbleed and12 mmspine margin. - Turnaround: produced within the standard 7–14 working day window with island-wide courier delivery.
Frequently asked questions
What is the difference between Rich Black and 100% K black in print design?
Use a four-colour Rich Black (C60 M40 Y40 K100, capped at 240% total ink on paper/card or 300% on packaging board) for large solid backgrounds so the black looks deep rather than grey. Use pure K100 for small body text (6–8 pt) so a 0.5 mm registration shift never causes coloured fringes.
How much bleed and safe margin do different print products need?
Include 2 mm bleed and 3 mm safe margin on stickers; 3 mm bleed and 4–5 mm safe margin on business cards, flyers, booklets and folding cartons (7 mm from brochure folds and 12–18 mm from booklet spines); and 10 mm perimeter bleed on large-format banners, signboards and placemats.
Why does a tri-fold brochure or roll fold have unequal panel widths?
When a sheet folds inward, the tucked panel wraps inside the outer two panels. Cutting each nested inner panel 1 mm narrower than the panel outside it allows a DL tri-fold (99 × 210 mm) or roll-fold brochure to close flat instead of buckling.
How should Spot UV, hot foil, embossing and white ink layers be supplied?
Supply each special finish on its own separate non-printing vector layer at 100% K (black) registered at the exact trim size, named SPOTUV, FOIL, EMBOSS or WHITE, alongside separate vector layers for FOLD, CREASE, CUT, DIELINE or DRILL.
How can I check my PDF or image file before sending it for printing?
Upload your PDF, PNG or JPG directly in EZ Print’s browser-based Interactive Artwork Preflight Checker (/artwork-checker/) to inspect trim dimensions, bleed extension, safe-zone clearance and effective DPI against your chosen product specification before requesting a quote.
How do you check your artwork and request a quote from EZ Print?
EZ Print has produced sheet-fed collateral, bound books, custom packaging and large-format displays in Singapore since 2017, checking every artwork file against your specification before production. Standard turnaround is generally 7–14 working days across all finishes, with island-wide courier delivery.
Test your print file right now in the interactive artwork preflight checker or request a quote with your specification and delivery date.
Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job.

