- What it is
- A single sheet of heavy board printed flat, creased across three or four horizontal score lines, and folded into a triangular A-frame that stands upright on a table or counter without separate hardware. The two angled faces present the message to both sides of a table at once, while the bottom flaps lock together either with a die-cut slot-and-tab base or with a factory tape strip so the triangle cannot splay flat under its own weight.
- What it is printed on
Heavy coated art card at the top of the weight range so the two sloping panels stay flat instead of bowing inward, or tear-resistant synthetic stock when the tent card sits on restaurant tables, bar counters or outdoor tasting stations exposed to condensation and wet wiping. On coated card, a matt or gloss film lamination adds rigidity across the top ridge and protects the lower edge where table cloths and trays brush against it.
- Matt art card, 350 gsm0.36 mmMaximum sheet stiffness so the two angled faces stand flat across a wide span without bowing.
- Art card, 350 gsm0.32 mmHigh colour punch for food photography and promotional graphics when laminated for wipe-down durability.
- Synthetic stock, 200 micron0.20 mmImpervious to spilled drinks and damp bar cloth wiping, though best kept to compact tent heights.
- How it feels
- Taut and self-supporting once the base tabs lock into place. Pick it up by the top crease and the triangle holds its geometry without sagging; ship it un-locked and the whole run packs completely flat in a slim carton, which is why overseas exhibitors and multi-branch operators favour it over rigid acrylic holders. The scored creases feel like smooth channels pressed into the board rather than sharp cracks.
- What it suits
- Conference panel nameplates, seminar table numbers, QR code ordering and Wi-Fi stands, hotel reception notices, retail counter promotions and food and beverage seasonal specials. It does not suit a windy outdoor patio unless weighted or clipped, and it does not suit a layout where the two faces are set right-side-up in the same direction on the flat net — one face will be upside down once the sheet folds over the top ridge.
- Lead time
- Standard turnaround is generally 7–14 working days. A cutting forme, a foil block, an embossing die or a screen made for the first time is made before anything can run; a tool already held is not.
- The common mistake
- Setting both display panels the same way up on the flat artwork file and forgetting the base flap allowance. When a flat sheet folds over its top score to form an A-frame, the back panel hangs upside down unless its artwork is rotated 180 degrees in the layout. Check a folded paper dummy before signing off, and hold bottom-edge copy clear of the base fold so table clutter does not hide it.

Print idea
Folded table tent card
Freestanding A-frame display card scored across the top and base ridges with an interlocking foot tab for restaurant and conference tables.
Standard turnaround is generally 7–14 working days.
What folded table tent card is
A single sheet of heavy board printed flat, creased across three or four horizontal score lines, and folded into a triangular A-frame that stands upright on a table or counter without separate hardware. The two angled faces present the message to both sides of a table at once, while the bottom flaps lock together either with a die-cut slot-and-tab base or with a factory tape strip so the triangle cannot splay flat under its own weight.
Heavy coated art card at the top of the weight range so the two sloping panels stay flat instead of bowing inward, or tear-resistant synthetic stock when the tent card sits on restaurant tables, bar counters or outdoor tasting stations exposed to condensation and wet wiping. On coated card, a matt or gloss film lamination adds rigidity across the top ridge and protects the lower edge where table cloths and trays brush against it.
No plateA table tent card works as a three-dimensional locked triangle whose two printed faces sit at opposite orientations on the flat net, which a studio photograph of the standing tent communicates immediately.
The specification
Six fields, and the last one is the useful one.
The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.
Where this sits.
Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.
- Application
- Material and effect
Also worth looking at
- Perforation and scoringStandard turnaround is generally 7–14 working days.
- Synthetic stock menus and tagsStandard turnaround is generally 7–14 working days.
- Literature rack and brochure standStandard turnaround is generally 7–14 working days.
- Every service, groupedSpecifications, stocks and finishing
- Every print idea, indexed three waysThe section index
- The materials libraryCaliper, weight and what each finish costs
Send the specification for this, and it comes back quoted.
Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.
- Quantity
- Stock — or the feel you want, if you do not know the stock
- Sides printed
- Finish
- Flat and finished size
- The deadline
Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.
