- What it is
- A rigid, non-reflective branding plaque mounted to the front face of a hotel or convention-centre speaker lectern, stage rostrum or panel discussion desk. Because almost every photograph and video clip of a keynote speaker frames the top third of the podium directly below the microphone, the lectern plaque is the single highest-visibility brand asset in a conference ballroom.
- What it is printed on
Rigid closed-cell foam-PVC board or dense Kapaline foam board faced with ultra-dull matt film lamination. Unlike a rolled paper poster or fabric banner that ripples over a wooden podium front, a rigid panel bridges recessed lectern mouldings smoothly and attaches in seconds using removable hook-and-loop tabs, magnetic strips or a top fold-over acrylic lip hanger without marring the hotel’s veneer.
- Matt art card, 350 gsm0.36 mmAnti-glare face stock for smaller clip-on podium header cards and press-desk plaques.
- How it feels
- Flat, architectural and completely dead to specular reflection. Under stage follow-spots and press camera flashes, the deep matt surface holds rich dark corporate backgrounds and crisp vector emblems without the white glare hotspot that ruins glossy signs on camera.
- What it suits
- Keynote speeches, AGM and townhall podiums, ministerial press briefings, hotel ballroom conferences at Suntec, MBS and Orchard hotels, and academic convocation rostrums. High-gloss acrylic or unlaminated glossy board never suits a stage lectern because theatrical spotlights bounce straight back into the camera lens.
- Lead time
- Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry.
- The common mistake
- Guessing the lectern width without checking whether the hotel podium has a raised wooden trim frame or an angled reading lip, or placing the logo at the very bottom of a full-height podium wrap. Camera shots crop tightly from the speaker’s waist upward; keep the primary crest and event title in the upper 350 mm of the lectern plaque so it sits squarely inside every tight headshot.

Print idea
Rigid foamboard lectern podium sign and stage mic plate
Anti-glare matt-laminated rigid foam-PVC or Kapaline lectern crest plaque and stage podium front panel engineered for broadcast and event photography.
Standard turnaround is generally 7–14 working days.
What rigid foamboard lectern podium sign and stage mic plate is
A rigid, non-reflective branding plaque mounted to the front face of a hotel or convention-centre speaker lectern, stage rostrum or panel discussion desk. Because almost every photograph and video clip of a keynote speaker frames the top third of the podium directly below the microphone, the lectern plaque is the single highest-visibility brand asset in a conference ballroom.
Rigid closed-cell foam-PVC board or dense Kapaline foam board faced with ultra-dull matt film lamination. Unlike a rolled paper poster or fabric banner that ripples over a wooden podium front, a rigid panel bridges recessed lectern mouldings smoothly and attaches in seconds using removable hook-and-loop tabs, magnetic strips or a top fold-over acrylic lip hanger without marring the hotel’s veneer.
No plateA lectern podium sign is defined by its camera-framed placement on the front face of a stage speaker rostrum under theatrical lighting, shown in the studio photograph.
The specification
Six fields, and the last one is the useful one.
The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.
Where this sits.
Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.
- Application
- Material and effect
Also worth looking at
- Tensioned fabric backdropStandard turnaround is generally 7–14 working days.
- Giant presentation mock chequeStandard turnaround is generally 7–14 working days.
- Foam PVC panelsStandard turnaround is generally 7–14 working days.
- Variable-data boardroom table tent name cardStandard turnaround is generally 7–14 working days.
- SignageThe specification, and how it is quoted
- ExhibitionThe specification, and how it is quoted
- StandeesThe specification, and how it is quoted
- Every print idea, indexed three waysThe section index
- The materials libraryCaliper, weight and what each finish costs
Questions
Ordering & specification details for rigid foamboard lectern podium sign and stage mic plate.
Which paper or board grades and calipers are held for rigid foamboard lectern podium sign and stage mic plate?
EZ Print pairs rigid foamboard lectern podium sign and stage mic plate with Matt art card at 350 gsm (measured caliper 0.36 mm — Anti-glare face stock for smaller clip-on podium header cards and press-desk plaques). Every grade is cross-referenced in the EZ Print materials library so weight and micrometer thickness remain consistent across your quotation.
How do I request a quotation and submit artwork for rigid foamboard lectern podium sign and stage mic plate in Singapore?
This specification is quoted under Signage and Exhibition and Standees at EZ Print. Send the flat and finished size, substrate or stock preference, printed sides, finishing, quantity and required date via the request-a-quote builder or WhatsApp, and supply print-ready PDF or outlined vector artwork so bleed, resolution and cut or crease lines can be checked before production.
What is the production turnaround and delivery schedule for rigid foamboard lectern podium sign and stage mic plate?
Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry. Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job. Island-wide courier delivery is arranged across Singapore once production is complete.
Request a quotation for rigid foamboard lectern podium sign and stage mic plate.
Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.
- Quantity
- Stock — or the feel you want, if you do not know the stock
- Sides printed
- Finish
- Flat and finished size
- The deadline
Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.
