- What it is
- A bound multi-page publication — a commemorative magazine, an exhibition catalogue, a research dossier or a training manual — produced in quantities ranging from a handful of presentation copies up to full event distributions. It is built in one of two ways: saddle-stitched, where folded four-page signatures are nested and stapled with two wire stitches through the centre crease, or perfect-bound, where gathered leaves are milled along the back edge and glued into a wrap-around cover with a flat, printable square spine.
- What it is printed on
A two-stock pairing: a heavier coated or uncoated card for the outer four-page cover to protect the corners and hold the binding, and a lighter coated art paper or uncoated text sheet for the inner pages so the leaves turn easily and lie flat. On a saddle-stitched booklet the total page count is always a multiple of four because every folded sheet creates four printed pages; on a perfect-bound book the page count must be high enough to create a flat spine width for the glue and scores.
- Matt art card, 310 gsm0.32 mmA protective outer cover that takes a clean crease at the spine without making the front cover spring open.
- Gloss art paper, 128 gsm0.11 mmSupple inner leaves that turn cleanly and keep bulk manageable as page counts climb.
- Gloss art paper, 157 gsm0.13 mmHeavier inner pages with higher opacity for photography-led lookbooks and commemorative editions.
- How it feels
- A saddle-stitched booklet opens wide in the hand and folds back on itself easily, with a rounded spine folded over two neat wire staples. A perfect-bound booklet feels like a retail magazine or paperback: stiff at the hinge, crisp at the two side-hinge scores beside the spine, and flat along the back edge so it stands upright on a shelf with a readable title on the spine.
- What it suits
- Anniversary and commemorative magazines, conference programmes, architectural and project lookbooks, product catalogues and academic or corporate pitch books. Saddle-stitching suits slim to medium page counts that need to open flat on a desk; perfect binding suits thicker publications that need a square spine and a bookshelf presence. Perfect binding does not suit very thin page counts, where the spine becomes too narrow for the cover hinge scores to fold cleanly.
- Lead time
- Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry.
- The common mistake
- Supplying a page count that is not a multiple of four for a saddle-stitched booklet, or placing key typography and faces across the centrefold of a perfect-bound spread. A saddle-stitched job missing two pages requires blank leaves or layout padding before it can be imposed, while a perfect-bound hingepinches the inner 6 mm of every spread into the glue clamp, swallowing words or faces that cross the gutter.

Print idea
Short-run booklet
Multi-page publication bound either by wire saddle-stitching through the centrefold or by square-backed perfect binding with a glued spine.
Standard turnaround is generally 7–14 working days.
What short-run booklet is
A bound multi-page publication — a commemorative magazine, an exhibition catalogue, a research dossier or a training manual — produced in quantities ranging from a handful of presentation copies up to full event distributions. It is built in one of two ways: saddle-stitched, where folded four-page signatures are nested and stapled with two wire stitches through the centre crease, or perfect-bound, where gathered leaves are milled along the back edge and glued into a wrap-around cover with a flat, printable square spine.
A two-stock pairing: a heavier coated or uncoated card for the outer four-page cover to protect the corners and hold the binding, and a lighter coated art paper or uncoated text sheet for the inner pages so the leaves turn easily and lie flat. On a saddle-stitched booklet the total page count is always a multiple of four because every folded sheet creates four printed pages; on a perfect-bound book the page count must be high enough to create a flat spine width for the glue and scores.
No plateThe decision between wire saddle-stitching and square-backed perfect binding lives in the spine construction and signature imposition rather than in a single sheet caliper, so the cover shows a studio photograph comparing both bound spines.
The specification
Six fields, and the last one is the useful one.
The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.
Where this sits.
Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.
- Format
- Material and effect
Also worth looking at
- Soft-touch laminated coverStandard turnaround is generally 7–14 working days.
- Perforation and scoringStandard turnaround is generally 7–14 working days.
- Literature rack and brochure standStandard turnaround is generally 7–14 working days.
- Every service, groupedSpecifications, stocks and finishing
- Every print idea, indexed three waysThe section index
- The materials libraryCaliper, weight and what each finish costs
Send the specification for this, and it comes back quoted.
Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.
- Quantity
- Stock — or the feel you want, if you do not know the stock
- Sides printed
- Finish
- Flat and finished size
- The deadline
Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.
