- What it is
- A double-sided overhead point-of-sale mobile — round, oval or contour die-cut — suspended above supermarket aisles, pharmacy counters or atrium promotion zones. Because shoppers approach an aisle from both directions and air-conditioning vents keep suspended signs turning slowly, both faces are printed in register and the top edge is punched with one or two metal eyelet grommets for ceiling-grid hooks and tensioned drop cords.
- What it is printed on
Heavy coated art card laminated on both sides, two sheets duplex-mounted back to back for extra stiffness, or rigid closed-cell foam PVC panel when the span needs to hang flat across a wide aisle without curling in humid store air.
- Matt art card, 350 gsm0.36 mmPrinted double-sided and film-laminated for compact circular and contour aisle danglers that need light weight on clip-on ceiling hooks.
- Bonded duplex, 600 gsm bonded0.72 mmTwo heavy sheets mounted back to back so larger hanging discs resist curling in air-conditioned retail halls.
- How it feels
- Smooth, rigid and balanced when lifted by the hanging cord. A matt film laminate on both faces stops overhead fluorescent and track spotlights from bouncing a white glare patch across the headline, while a metal eyelet crimped into the top hole prevents the suspension wire from slicing through the board margin.
- What it suits
- Supermarket aisle promotions, shopping-mall atrium campaigns, pharmacy category callouts and product launches where floor and shelf space are already full. It does not suit low ceilings where a suspended board drops into head height or blocks sprinkler heads and exit signage.
- Lead time
- Standard turnaround is generally 7–14 working days. A cutting forme, a foil block, an embossing die or a screen made for the first time is made before anything can run; a tool already held is not.
- The common mistake
- Punching a single hanging hole too close to the cut rim on a wide board without an eyelet or a second suspension point. A wide oblong dangler hung from a single central thread tilts and spins continuously in air-conditioning drafts, and a bare hole punched less than 12 mm from the trim tears open under the board’s own weight.

Print idea
Ceiling dangler and hanging disc
Double-sided die-cut hanging mobile printed on heavy art card or rigid foam board, suspended from retail ceiling grids with eyelet grommets and drop wires.
Standard turnaround is generally 7–14 working days.
What ceiling dangler and hanging disc is
A double-sided overhead point-of-sale mobile — round, oval or contour die-cut — suspended above supermarket aisles, pharmacy counters or atrium promotion zones. Because shoppers approach an aisle from both directions and air-conditioning vents keep suspended signs turning slowly, both faces are printed in register and the top edge is punched with one or two metal eyelet grommets for ceiling-grid hooks and tensioned drop cords.
Heavy coated art card laminated on both sides, two sheets duplex-mounted back to back for extra stiffness, or rigid closed-cell foam PVC panel when the span needs to hang flat across a wide aisle without curling in humid store air.
No plateA ceiling dangler is defined by its double-sided contour dieline and top grommet balance points rather than by a novel board core, so the cover carries a studio photograph of the suspended disc.
The specification
Six fields, and the last one is the useful one.
The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.
Where this sits.
Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.
- Format
- Material and effect
Also worth looking at
- Ceiling-rigged bannersStandard turnaround is generally 7–14 working days.
- Foam PVC panelsStandard turnaround is generally 7–14 working days.
- Shelf talker and aisle wobblerStandard turnaround is generally 7–14 working days.
- Every service, groupedSpecifications, stocks and finishing
- Every print idea, indexed three waysThe section index
- The materials libraryCaliper, weight and what each finish costs
Questions
Ordering & specification details for ceiling dangler and hanging disc.
Which paper or board grades and calipers are held for ceiling dangler and hanging disc?
EZ Print pairs ceiling dangler and hanging disc with Matt art card at 350 gsm (measured caliper 0.36 mm — Printed double-sided and film-laminated for compact circular and contour aisle danglers that need light weight on clip-on ceiling hooks); Bonded duplex at 600 gsm bonded (measured caliper 0.72 mm — Two heavy sheets mounted back to back so larger hanging discs resist curling in air-conditioned retail halls). Every grade is cross-referenced in the EZ Print materials library so weight and micrometer thickness remain consistent across your quotation.
How do I request a quotation and submit artwork for ceiling dangler and hanging disc in Singapore?
EZ Print quotes every job from its exact production specification. Send the flat and finished size, substrate or stock preference, printed sides, finishing, quantity and required date via the request-a-quote builder or WhatsApp, and supply print-ready PDF or outlined vector artwork so bleed, resolution and cut or crease lines can be checked before production.
What is the production turnaround and delivery schedule for ceiling dangler and hanging disc?
Standard turnaround is generally 7–14 working days. A cutting forme, a foil block, an embossing die or a screen made for the first time is made before anything can run; a tool already held is not. Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job. Island-wide courier delivery is arranged across Singapore once production is complete.
Request a quotation for ceiling dangler and hanging disc.
Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.
- Quantity
- Stock — or the feel you want, if you do not know the stock
- Sides printed
- Finish
- Flat and finished size
- The deadline
Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.
