EZ Print — Your Trusted Printing PartnerSame-day & ExpressRequest a quote

Popular searches

Can't find it? Tell us what you need and we will quote it.

Stepped 5-tab Mylar-laminated die-cut index divider bank with four euro ring holes printed with the EZ Print logo beside a presentation ring binder.

Print idea

Die-cut index tab divider and tender dossier set

Stepped die-cut section divider bank with film-reinforced tabs and ring-binder hole punching for tender submissions, compliance manuals and pitch books.

Standard turnaround is generally 7–14 working days.

What die-cut index tab divider and tender dossier set is

A collated bank of heavy card divider sheets die-cut along the fore-edge into stepped protruding tabs — typically in banks of five,eight, ten or twelve positions — and drilled along the binding margin with two, three or four euro-standard ring holes. Each tab is printed with a section number or title on one or both sides so an evaluator or auditor can open directly to the required annex inside a ring binder or Wire-O manual.

Heavy matt or gloss art card or tear-resistant synthetic board, finished either with full-sheet film lamination or with clear Mylar strip reinforcement folded around each protruding tab ear and along the punched binding strip so repeated thumbing and ring tension never rip the card.

No plateA tabbed divider set is defined by its stepped fore-edge tab bank geometry and four-hole euro ring punch layout, shown directly in the studio photograph beside a presentation binder.

The specification

Six fields, and the last one is the useful one.

The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.

What it is
A collated bank of heavy card divider sheets die-cut along the fore-edge into stepped protruding tabs — typically in banks of five,eight, ten or twelve positions — and drilled along the binding margin with two, three or four euro-standard ring holes. Each tab is printed with a section number or title on one or both sides so an evaluator or auditor can open directly to the required annex inside a ring binder or Wire-O manual.
What it is printed on

Heavy matt or gloss art card or tear-resistant synthetic board, finished either with full-sheet film lamination or with clear Mylar strip reinforcement folded around each protruding tab ear and along the punched binding strip so repeated thumbing and ring tension never rip the card.

  • Matt art card, 310 gsm0.32 mmStiff divider body that stands upright inside alever-arch or D-ring binder without slumping.
  • Matt art card, 350 gsm0.36 mmExtra-heavy tab divider stock for high-frequency SOP manuals and tender submission volumes.
  • Synthetic stock, 200 micron0.20 mmWaterproof, tear-proof divider sheet for kitchen, laboratory and site operations binders.
How it feels
Crisp, rigid and indexed like a legal or engineering reference dossier. Each die-cut tab ear has smooth radiused shoulders that do not dog-ear when slid into a slipcase, and the laminated surface wipes clean of thumb marks.
What it suits
Government and statutory board tender submissions, legal and M&A closing binders, ISO and workplace safety SOP manuals, board meeting packs, and multi-module training ring binders. Standard A4 ring binders swallow protruding tabs unless the binder cover is oversized or the divider body is trimmed slightly narrower to compensate for the tab projection.
Lead time
Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry.
The common mistake
Forgetting that a five-tab bank requires five separate press layouts (one for each tab position down the right edge) and setting the tab text too close to the outer die-cut contour. Each tab ear is only a narrow strip of card — keep section numerals and titles centred with at least 3 mm clearance from every cut and radiused shoulder.

Where this sits.

Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.

Application
Format
Material and effect

Also worth looking at

Questions

Ordering & specification details for die-cut index tab divider and tender dossier set.

Which paper or board grades and calipers are held for die-cut index tab divider and tender dossier set?

EZ Print pairs die-cut index tab divider and tender dossier set with Matt art card at 310 gsm (measured caliper 0.32 mm — Stiff divider body that stands upright inside alever-arch or D-ring binder without slumping); Matt art card at 350 gsm (measured caliper 0.36 mm — Extra-heavy tab divider stock for high-frequency SOP manuals and tender submission volumes); Synthetic stock at 200 micron (measured caliper 0.20 mm — Waterproof, tear-proof divider sheet for kitchen, laboratory and site operations binders). Every grade is cross-referenced in the EZ Print materials library so weight and micrometer thickness remain consistent across your quotation.

How do I request a quotation and submit artwork for die-cut index tab divider and tender dossier set in Singapore?

EZ Print quotes every job from its exact production specification. Send the flat and finished size, substrate or stock preference, printed sides, finishing, quantity and required date via the request-a-quote builder or WhatsApp, and supply print-ready PDF or outlined vector artwork so bleed, resolution and cut or crease lines can be checked before production.

What is the production turnaround and delivery schedule for die-cut index tab divider and tender dossier set?

Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry. Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job. Island-wide courier delivery is arranged across Singapore once production is complete.

Request a quotation for die-cut index tab divider and tender dossier set.

Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.

  • Quantity
  • Stock — or the feel you want, if you do not know the stock
  • Sides printed
  • Finish
  • Flat and finished size
  • The deadline

Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.