EZ Print — Your Trusted Printing PartnerSame-day & ExpressRequest a quote

Popular searches

Can't find it? Tell us what you need and we will quote it.

Corrugated kraft hot-beverage cup sleeve fitted around a takeaway coffee cup, printed with the EZ Print logo.

Print idea

Bag topper header card and cup sleeve

Scored fold-over header cards with euro-slot hanger holes for clear retail polybags, paired with curved die-cut corrugated hot-beverage cup sleeves.

Standard turnaround is generally 7–14 working days.

What bag topper header card and cup sleeve is

Two high-volume functional packaging wraps that turn plain commodity containers into branded retail packs. A bag topper (or header card) is a rectangular card scored down its horizontal midline, folded over the top of a clear cellophane or polybag and stapled or heat-sealed shut, with a punched round hole or euro-slot at the top for pegboard hanging. A cup sleeve (or coffee clutch) is a curved trapezoidal band die-cut with interlocking tabs or a glued seam that slides tightly up the tapered wall of an 8 oz, 12 oz or 16 oz takeaway paper cup.

Heavy coated art card or unbleached kraft board for fold-over bag toppers, and single-face E-flute corrugated kraft/white board or heavy embossed card for hot-cup sleeves that need an insulating air gap between hot coffee and the customer’s fingers.

No plateA fold-over bag topper and a conical cup sleeve are flat packaging nets defined by euro-slot punch clearance and cup-taper arc geometry, so the cover shows a branded corrugated sleeve fitted on a takeaway coffee cup.

The specification

Six fields, and the last one is the useful one.

The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.

What it is
Two high-volume functional packaging wraps that turn plain commodity containers into branded retail packs. A bag topper (or header card) is a rectangular card scored down its horizontal midline, folded over the top of a clear cellophane or polybag and stapled or heat-sealed shut, with a punched round hole or euro-slot at the top for pegboard hanging. A cup sleeve (or coffee clutch) is a curved trapezoidal band die-cut with interlocking tabs or a glued seam that slides tightly up the tapered wall of an 8 oz, 12 oz or 16 oz takeaway paper cup.
What it is printed on

Heavy coated art card or unbleached kraft board for fold-over bag toppers, and single-face E-flute corrugated kraft/white board or heavy embossed card for hot-cup sleeves that need an insulating air gap between hot coffee and the customer’s fingers.

  • Kraft board, 350 gsm0.46 mmNatural unbleached brown board for artisanal coffee, bakery and snack bag toppers and rustic cup sleeves.
  • Matt art card, 350 gsm0.36 mmHigh tear resistance around the punched euro-slot hanger hole for pegboard retail header cards.
How it feels
Stiff at the peg hole on a bag topper, and ridged and insulating on a corrugated cup sleeve. The exposed inner flutes of a cup sleeve grip the paper cup wall firmly so the cup does not slip through while creating thermal air channels that keep outer fingers comfortable.
What it suits
Confectionery, roasted coffee and snack polybags, hardware and accessory pegboard packs, specialty cafes, bubble-tea chains, exhibition coffee carts and corporate launch catering. A straight rectangular strip does not suit a takeaway cup: because beverage cups taper conical from rim to base, a sleeve must be cut on a curved arc net or it will gape open at the bottom edge.
Lead time
Standard turnaround is generally 7–14 working days. A cutting forme, a foil block, an embossing die or a screen made for the first time is made before anything can run; a tool already held is not.
The common mistake
Forgetting that the back half of a fold-over bag topper prints upside-down on the flat press sheet before folding, or punching the euro-slot hanger hole so low that the top of the polybag blocks the peg hook when stapled.

Where this sits.

Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.

Application
Format
Material and effect

Also worth looking at

Questions

Ordering & specification details for bag topper header card and cup sleeve.

Which paper or board grades and calipers are held for bag topper header card and cup sleeve?

EZ Print pairs bag topper header card and cup sleeve with Kraft board at 350 gsm (measured caliper 0.46 mm — Natural unbleached brown board for artisanal coffee, bakery and snack bag toppers and rustic cup sleeves); Matt art card at 350 gsm (measured caliper 0.36 mm — High tear resistance around the punched euro-slot hanger hole for pegboard retail header cards). Every grade is cross-referenced in the EZ Print materials library so weight and micrometer thickness remain consistent across your quotation.

How do I request a quotation and submit artwork for bag topper header card and cup sleeve in Singapore?

EZ Print quotes every job from its exact production specification. Send the flat and finished size, substrate or stock preference, printed sides, finishing, quantity and required date via the request-a-quote builder or WhatsApp, and supply print-ready PDF or outlined vector artwork so bleed, resolution and cut or crease lines can be checked before production.

What is the production turnaround and delivery schedule for bag topper header card and cup sleeve?

Standard turnaround is generally 7–14 working days. A cutting forme, a foil block, an embossing die or a screen made for the first time is made before anything can run; a tool already held is not. Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job. Island-wide courier delivery is arranged across Singapore once production is complete.

Request a quotation for bag topper header card and cup sleeve.

Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.

  • Quantity
  • Stock — or the feel you want, if you do not know the stock
  • Sides printed
  • Finish
  • Flat and finished size
  • The deadline

Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.