- What it is
- A freestanding point-of-sale display board that stands upright at a slight backward rake on a shop counter, clinic reception desk, exhibition table or F&B cashier till without needing a separate acrylic holder. A printed graphic sheet is mounted to a rigid board core and fitted on the reverse with a die-cut fold-out cardboard easel rudder wing whose hinged locking tongue slots into place to hold the display rigid.
- What it is printed on
A full-colour printed sheet sealed in non-glare matt or high-contrast gloss film lamination and dry-mounted onto rigid Kapaline foam board or heavy display greyboard, trimmed flush on four sides or contour-cut to a custom silhouette along the top edge.
- Matt art card, 350 gsm0.36 mmSmooth printed face sheet and die-cut rear easel rudder strut with low-glare readability.
- Bonded duplex, 600 gsm bonded0.72 mmCompact double-thick card alternative for smaller A6 and A5 counter cards.
- How it feels
- Substantial, flat and wind-stable on an indoor counter: unlike a folded paper tent card that can be brushed aside by a sleeve or flattened under a handbag, a mounted board with a locked rear strut feels like a permanent fixture yet folds flat into an envelope for island-wide store distribution.
- What it suits
- Retail checkout and cosmetic counter promotions, PayNow and QR ordering stands, clinic and hotel reception notices, product launch hero displays, and exhibition booth tabletop signage. It does not suit exposed outdoor tables where gusting wind can tip a lightweight easel — use a weighted base or table clip outdoors.
- Lead time
- Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry.
- The common mistake
- Applying gloss film lamination to a counter card that carries a scannable PayNow or registration QR code directly beneath downlights, or placing important footer copy right at the bottom trim edge where counter clutter obscures the lowest 15 mm of the board. Specify matt lamination whenever smartphones must scan a code on the card.

Print idea
Self-standing countertop strut card and easel display
Rigid printed counter display card mounted to foam board or heavy greyboard with a fold-out rear locking rudder wing for reception desks and retail checkouts.
Standard turnaround is generally 7–14 working days.
What self-standing countertop strut card and easel display is
A freestanding point-of-sale display board that stands upright at a slight backward rake on a shop counter, clinic reception desk, exhibition table or F&B cashier till without needing a separate acrylic holder. A printed graphic sheet is mounted to a rigid board core and fitted on the reverse with a die-cut fold-out cardboard easel rudder wing whose hinged locking tongue slots into place to hold the display rigid.
A full-colour printed sheet sealed in non-glare matt or high-contrast gloss film lamination and dry-mounted onto rigid Kapaline foam board or heavy display greyboard, trimmed flush on four sides or contour-cut to a custom silhouette along the top edge.
No plateA strut card combines a rigid mounted front panel with a hinged rear locking rudder wing, shown from both the front face and rear easel angle in the studio photograph.
The specification
Six fields, and the last one is the useful one.
The same six questions are answered for every entry in this section, in the same order, so two objects can be compared without reading two pages of prose. The mistake is stated last and stated plainly, because it is the one that costs a reprint and it is the reason this page is worth sending to a colleague.
Where this sits.
Every entry is indexed three ways, because a buyer arrives knowing the occasion, the object or the material and almost never all three.
- Format
- Material and effect
Also worth looking at
- Folded table tent cardStandard turnaround is generally 7–14 working days.
- Hang-sell clip strip and countertop displayStandard turnaround is generally 7–14 working days.
- Large-format photo and mounted posterStandard turnaround is generally 7–14 working days.
- Every service, groupedSpecifications, stocks and finishing
- Every print idea, indexed three waysThe section index
- The materials libraryCaliper, weight and what each finish costs
Questions
Ordering & specification details for self-standing countertop strut card and easel display.
Which paper or board grades and calipers are held for self-standing countertop strut card and easel display?
EZ Print pairs self-standing countertop strut card and easel display with Matt art card at 350 gsm (measured caliper 0.36 mm — Smooth printed face sheet and die-cut rear easel rudder strut with low-glare readability); Bonded duplex at 600 gsm bonded (measured caliper 0.72 mm — Compact double-thick card alternative for smaller A6 and A5 counter cards). Every grade is cross-referenced in the EZ Print materials library so weight and micrometer thickness remain consistent across your quotation.
How do I request a quotation and submit artwork for self-standing countertop strut card and easel display in Singapore?
EZ Print quotes every job from its exact production specification. Send the flat and finished size, substrate or stock preference, printed sides, finishing, quantity and required date via the request-a-quote builder or WhatsApp, and supply print-ready PDF or outlined vector artwork so bleed, resolution and cut or crease lines can be checked before production.
What is the production turnaround and delivery schedule for self-standing countertop strut card and easel display?
Standard turnaround is generally 7–14 working days. Counted from approved artwork rather than from the enquiry. Same-day and urgent printing available. Subject to artwork approval, payment, print type and production availability. Timing confirmed per job. Island-wide courier delivery is arranged across Singapore once production is complete.
Request a quotation for self-standing countertop strut card and easel display.
Every job is quoted from its specification — stock, quantity, sides, finish, size and deadline.
- Quantity
- Stock — or the feel you want, if you do not know the stock
- Sides printed
- Finish
- Flat and finished size
- The deadline
Artwork is welcome but not required to start. Email sales@ezprint.com.sg if you would rather attach files.
